Brother NX 400 manual Lcd

APPENDIX —————————————————————————————————————————————————————

Symptom	Probable Cause	Remedy	Reference
	The feed dogs are lowered.	Slide the drop feed lever to the left.	page 97
	The stitch is too fine.	Lengthen the stitch length.	page 56	CONTENTS
not feed.
	The presser foot that is used is not	Turn the presser foot pressure dial to
		Attach the presser foot that is appro-
	appropriate for the type of stitch that	priate for the type of stitch that you	page 128
The fabric does	you wish to sew.	wish to sew.
	The pressure of the presser foot is	the right to increase the pressure of	page 39
	weak.
		the presser foot.
does not come on.	The sewing lamp is damaged.	Remove the tangle thread. If the	–	GETTING
		authorized service center.
	The thread is tangled, for example,	thread is tangled in the shuttle, clean	page 135
	in the shuttle.	the shuttle.
The sewing lamp		Contact your retailer or the nearest
				READY
Nothing appears	The brightness of the LCD is either	Adjust the brightness of the LCD.	page 142
in the LCD.	too light or too dark.
				SEWING BASICS
				UTILITY STITCHES
				APPENDIX

INDEX

140