Basic Sewing (1)
Basic Sewing
Before sewing.
Begin sewing.
Finish
Sewing.
✽When changing sewing directions.
Reinforcement stitches
1cm
1cm
CONTENTS | |
Accessories | |
Parts | Names |
| of |
Begin | Before You |
1 Lift foot, pull about 15cm of upper | 2 | Lower foot. |
and bobbin thread under and behind | 3 | While needle is pierced all the way |
foot, and position fabric under foot. | through fabric, step gently on foot |
| |
| controller. |
Pin Feeding (for hard-to-handle fabrics)
4Raise needle to highest position.
5Lift foot, remove fabric and cut thread.
✽When using thread trimmer:
4Push thread trimmer button (this will cause the upper and bobbin threads to be cut automatically and the needle to stop in a raised position.)
5Lift presser foot and remove fabric.
1 | Make sure needle is pierced all the | ✽ At the beginning of a seam, sew a | |
| way through fabric. | few stitches with the hand wheel, hit | |
2 | Lift presser foot, and turn fabric using | the reverse stitch button and sew a | |
few stitches back to reinforce your | |||
| needle as an axis. | ||
| seam, then go back to normal sewing | ||
3 | Lower foot and continue sewing. | ||
and finish the seam. Do the same at | |||
|
|
the end of a seam.
Pin Feeding Unit
Light Bulb | Needles and | Changing |
| Threading |
|
Needle Chart | Samples and | Stitch |
Fabric:
Velvet
Synthetic Suede
Others
Indicator Needle
N
Feed Pin 
Fabric
Feed Pin | Feed Dog |
|
Presser Feet | Changing |
Sewing | Basic |
Caring for Your Machine | |
✽ The above fabrics | 1 Move feed adjustment knob | 2 Adjust pressure adjust- | 3 Gently pull thread until feed pin |
can be sewed | to pin feeding position. | ment dial until indicator | catches fabric and sew. |
neatly by sewing |
| needle is in the right posi- |
|
by pin feeding. |
| tion. |
|
The feed pin passes up through all layers of fabric moving with the feed dog's motion to feed all layers of the fabric evenly.
✽Feed pin is automatically lowered when presser foot is raised.
Shooting | Trouble |
13
