Brother PQ1300 operation manual 1620, Invisible Zipper Foot, Lining

Invisible Zipper Foot Teeth

Lining

Needle CONTENTS

1Attach invisible zipper foot.

2Alight zipper with fabric. Mark the base of the opening approximately 2 cm above the end of the zipper.

Slide

Base of

Opening

2cm

1Raise needle and foot.

2Move separater so it sits under presser foot.

3Make sure it is lined up so that the needle passes through the slot of the separater without hitting the plate itself.

4 Secure liner plate in place with

lining plate screws.

Separater	Accessories
	Names Parts
	of
Separater	Before Begin

3 Fold the area to be sewed.

Basting

4Line up zipper with fabric on the

wrong side of the fabric, open zipper, and baste zipper to the fabric.

5Sew the zipper to the fabric with the wrong side of the zipper and

fabric up.

✽ When sewing with the teeth to the right, the left side of the foot should line up with the left teeth of the zipper.

5Set pressure of sewing feet and feed position to pin feeding position.

6Pull thread until lower needle catches fabric.

✽Sew 2-3 reinforcement stitches.

7When not using separater, it can be swung off to the side as illustrated in drawing.

		You
Needle	Needles and		Changing
Lining
LightBulb
Separater	Threading
Velvets
Needle Chart	Samples and		Stitch
Presser Feet		Changing
Sewing		Basic
Machine	Your		Caring for
Shooting		Trouble

1620