Basic Sewing (3)
Note | 5 Sew zipper onto fabric along | |
mark. | ||
Make sure power is off before changing feet. | ||
| ||
|
|
Zipper Foot
1Attach zipper foot.
2 Turn hand wheel to lower needle |
|
and adjust position of foot to |
|
needle. | A |
|
6Line up folded seam to stitches.
Accessories | |
Parts | Names |
| of |
Begin | Before You |
3Line up zipper to the section of fabric it will be attached to, and mark the base of the opening on the fabric. It should be set approximately .5 centimeters below zip stop.
4Fold hem about .2 cm from mark, and make a mark along the edge.
Slide
Stop
0.5cm
0.2cm
Base of Opening
7Change position of zipper foot.
8Turn hand wheel to lower needle and make sure the needle and position of the foot are lined up properly.
9Baste zipper onto fabric and sew along edge with fabric right side up.
✽Reinforce base of opening by sewing over it twice.
✽If the zipper slide gets in the way, lower the needle all the way through the fabric, lift the foot,and move the slider out of the way.
B 
Light Bulb | Needles and | Changing | |
| Threading |
| |
Needle Chart | Samples and | Stitch | |
Presser Feet | Changing | ||
Sewing | Basic | ||
Machine | Your | Caring for | |
Shooting | Trouble | ||
15
