Threading (1)
Bobbin Winding | Note |
Do not move bobbin winding clutch while machine is running.
3
1
4
2
]1
�Spool Cap | 2 ]2 |
| Spool Cushion |
1
Spool of Thread
3
1 Raise the thread guide bar all the way.
2 Mount a spool thread on the spool pin.
✽1 Use spool cap when using
5- 0: See the following illustrations.
Thread Notch 1 |
|
Thread Notch 2 | Bobbin |
| Bobbin Winder |
| Shaft |
Bobbin Winding Clutch
Guide Pin
3Pass the thread through the triangu- lar hole.
4Pass thread through bobbin winding thread guide as shown in drawing.
5Run thread through top thread notch 1, and align bottom thread notch 2 of the bobbin with guide pin on bobbin winder shaft.
6Press bobbin winding clutch up against empty bobbin. If the bobbin stop does not slide easily between the top and bottom of the bobbin, check that the bobbin is seated prop-
erly with the guide pin (5) inserted 7 into the lower notch.
