Fabric Separator(for joining lining to fabric)
✽Use this technique for sewing velvet and lining together.
1Raise needle and foot.
2Move separator so it sits under
presser foot.
3Make sure it is lined up so that the needle passes through the
slot of the separator without hit- ting the plate itself.
4Secure liner plate in place with
lining plate screws.
5Set pressure of sewing feet and feed position to pin feeding posi-
tion.
6Pull thread until lower needle catches fabric.
✽Sew
7When not using separator, it can be swung off to the side as illus- trated in drawing.
Needle
Separator
Fabric
Separator
Needle
Lining
Separator Velvets
•Use the separator to neatly sew 2 hard to manage fabrics together by keeping them from interacting with one and other before the needle sews them to- gether in a perfect seam.
Seam Guide
1Tighten the screw securely with a screwdriver since it might other-
wise loosen due to vibration.
1
Installation
To be able to adjust the position of the foot towards the arrow.
Adjustment
Note
•Lighten the presser foot pressure slightly when using the fabric separator.
19
