Before You Begin (1)
Power Cord and Foot Controller
Note
Please use common household current.
●Plug in cord.
●Plug foot controller into machine.
Note
Foot controller: Model P
This foot controller is used for sewing machine model PQ1500S.
Power Switch
●Flip power switch to “I” position to turn on.
●To switch power off, flip switch to “O” position.
Power Cord |
Foot Controller
Power Switch
I
O
Hand Wheel
●Position needle using hand wheel.
✽Always turn hand wheel towards you.
Stitch Length Regulator
●Adjust desired stitch length using stitch regulator dial.
Hand Wheel
Stitch Length
Reference Mark
1
7 |
| 2 | Lower number |
|
| ||
|
|
| |
|
|
| = shorter stitches |
6 |
| 3 | Higher number |
| = longer stitches | ||
| 5 |
| |
| 4 |
| |
|
|
|
Stitch Length Regulator
Thread Tension Dial
●When tighter thread tension is desired, turn the tension dial to the right. Upper and bobbin threads will meet on right side of the fabric.
●When looser thread tension is de- sired, turn tension dial to the left. Upper and lower threads will then meet on wrong side of fabric.
Upper Thread Tension
LoosenTighten
Tension Block
Reverse Stitch Lever
●Sewing in reverse is possible when the reverse stitch lever is in the lowered position.
✽Make sure to push the lever all the way down when reverse sew- ing is desired.
✽When the feed adjustment dial is set between
Reverse Stitch Lever
3