Changing Presser Feet
Note Make sure the power is off before changing presser feet.
Changing Presser Feet
(Zipper Foot)
1 Raise presser foot, and raise needle to highest position.
2Loosen and remove screw using
screwdriver.
3Attach zipper foot and tighten
screw.
✽ Use the same method to attach the other feet that come with your PQ1500S.
✽ See page 18 for directions on at- taching the “Walking Foot”.
✽Use the position knob on back of the zipper foot to adjust position of foot in relation to needle.
✽ Only the zipper foot has a posi- tion knob. You can begin sewing with all other presser feet imme- diately after attaching.
Presser Feet
●Pin Feed Foot For perfect stitch- ing on otherwise difficult fabrics like velvet, leather and suede.
●Rolled Hem Foot Use on the edge of fabric, such as on hems of dress shirts, to fold the edge of the fabric in three while sewing.
●Invisible Zipper Foot
Use to attach con- cealed fasteners.
●Quilting Foot Spring action foot for darning, quilting or
✽Use only feet supplied with your PQ1500S. Each foot is spe- cially designed for this machine and has clearance for the pin at the rear of each foot. Use of other presser feet with the PQ se- ries machines may damage or break the pin feed mechanism.
●General purpose Foot
This foot is used for most sewing. (Can also be used for sewing thick fabrics or seams.)
✽When sewing thick seams, lightly guide
the fabric with your hand on the down- ward side of the seam.
✽ Can also be used with pin feeding.
●Zipper Foot
Use to attach fasten- ers other than con- cealed fasteners.
●1/4” Foot
For quilt and patch- work piecing with 1/4” or 1/8” seam allowance.
●Walking Foot
For sewing or quilt- ing on fabrics which stick or tend to slip Useful for sewing multiple layers as in quilting.
13
