] Place the thread end so that it does not protrude from the bobbin.
7 While holding the end of the thread, step on | 8 Stop winding process when bobbin is |
the foot controller for a few seconds. Once | full. Take the foot off foot controller. |
enough thread has wound itself around the |
|
bobbin to hold itself in place, release the |
|
foot controller and trim the excess thread. |
|
Continue to wind the bobbin while pressing |
|
down on the foot controller. |
|
Bobbin Winding Clutch
9 Manually move bobbin winding clutch 0 Cut thread and remove bobbin. back to original position.
8