GETTING STARTED

Power Supply

AC Adapter

Use the AD-E001 (AC adapter) for this labeling system. The AD-18 or AD-24ES cannot be used. Connect the AC adapter directly to the P-touch labeling system.

1Insert the plug on the AC adapter cord into the connector marked DC IN 12V on the P-touch labeling system.

2Insert the AC adapter plug into a standard electrical outlet.

• Turn the P-touch labeling system off before disconnecting the AC adapter.

• Do not pull or bend the AC adapter cord.

•When power is disconnected for more than two minutes, all text and format settings will be cleared. Any text files stored in the memory will also be cleared.

To safeguard and backup the labeling system's memory, when the AC adapter is unplugged it is recommended to have AA-size alkaline batteries (LR6) or Ni-MH rechargeable batteries (HR6) installed in the labeling system.

Using the Rechargeable Li-ion Battery„Installing the Rechargeable Li-ion Battery

1

Open the rear cover by pressing the cover latch.

Cover latch

 

 

Rear cover

19Power Supply