Setting Bar Code Parameters and Entering Bar Code Data

1Press the Bar Code key.

The Bar Code Setup screen is displayed.

Up to five bar codes can be entered on a label.

2Select an attribute using the or key, and then set a value for that attribute using the or key.

-Protocol: CODE39, CODE128, EAN-8, EAN-13, GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF), CODABAR

-Width: Small, Large

-Under #: On, Off

-Check Digit: Off, On

Check digit only available for Code39, I-2/5 and Codabar protocols.

Characters may not appear below the bar code even when "On" is selected for "Under #", depending on the tape width being used, the number of lines entered, or the current character style settings.

3Press the OK or Enter key to apply the settings.

New settings are NOT applied if you do not press the OK or Enter key.

4Type in the bar code data.

Special characters can be entered in the bar code when using the CODE39, CODE128, CODABAR or GS1-128 protocols. When not using special characters, go to step 7.

5Press the Symbol key.

A list of characters available for the current protocol is displayed.

6Select a character using the or key, then press the OK or Enter key to insert the character in the bar code data.

7Press the OK or Enter key to insert the bar code in the label. The bar code is displayed on the text entry screen.

To print labels refer to “LABEL PRINTING” on page 41.

• Press the Escape key to return to the previous step.

• Press the Space key to set the selected attribute to the default value.

• Refer to the Bar Code Settings table for a list of all available settings.

Editing and Deleting a Bar Code

•To edit bar code parameters and bar code data, position the cursor beneath the bar code mark on the data entry screen and then open the Bar Code Setup screen. Refer to “Setting Bar Code Parameters and Entering Bar Code Data” on page 30.

•To delete a bar code from a label, position the cursor to the right of the bar code mark on the data entry screen and press the Backspace key.

LABEL A EDITING z

1

2

3

4

5

6

7

8

9

Creating a Bar Code Label

 

30