
1Enter text.
Example: Create a label "B020", "C030", "D040" from"A010" by using this function.
2Press the Shift key and then press the Serialize key. Select "Simultaneous" by using the
or
key and press the OK key.
3Select the first character(s) that you want to increase by using the 
,
,
or
key and press the OK or Enter key twice.
4Select the second character(s) that you want to increase by using the
,
,
or
key and press the OK or Enter key twice. Example: Select 1.
You cannot select the first character(s) as it is greyed out.
5Select Increment and Count by using the
or
key and set the value by using the
or
key.
Example: When you want to increase the number by one four
times, set Increment: 1, Count: 4.
6Press the OK or Enter key to display the screen that you set.
Example: 











• When you press the Shift key and then press the Serialize key, you can do the setting again. After redo the setting, the message "OK to overwrite the Data after This Position?" is shown. If it's ok to overwrite, press OK key.
•You can select All/Current/Range when printing as there are multiple pages of labels.
•To print labels refer to “LABEL PRINTING” on page 41.
LABEL A EDITING z
1
2
3
4
5
6
7
8
9
Entering a Serialize Label |
|
32 | |
|
|