
Using this function you can print up to 50 copies of the same label.
1Make sure that the appropriate tape cassette is inserted and ready for printing.
2Press the Shift key and then press the Print key to display the Copies screen, and then select the number of copies to be printed using the
or
key, or type the number using the number keys.
Hold down the
or
key to change the number of copies faster.
3Press the OK or Enter key. "Printing...Copies" is displayed while the labels are being printed.
• Press the Escape key to return to the previous step.
• The figures shown on the screen during printing indicate the “count / number of copies set”.
•Pressing the Space key when setting the number of copies resets the value to 1, the default.
•When the message "Cut Tape or Press Enter to Continue" is displayed, select one. For details, see “Selecting how tape is fed and cut” on page 40.
Attaching Labels
1If necessary, trim the printed label to the desired shape and length using scissors, etc.
2Peel the backing from the label.
3Position the label and then press firmly from top to bottom with your finger to attach the label.
• The backing of some types of tapes may be
•Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.
•Be sure to read the instructions provided with Fabric
•Please use scissors to cut Heat Shrink Tube.
PRINTING LABEL z
1
2
3
4
5
6
7
8
9
Attaching Labels 42