
LABEL PRINTING
Label Preview
You can preview the current page and check the layout before printing.
1Press the Preview key.
An image of the label is displayed on the screen.
The length of the label is shown in the
Press the
or
key to scroll the preview to the left or right. Press the
or
key to change the magnification of the preview.
• Press the Escape, OK or Enter key to return to the text entry screen.
• To scroll the preview to the left or right end, press the Shift key and then press the
or
key.
•To print the label directly from the preview screen, press the Print key or open the print options screen and select a print option. Refer to "Printing a Label" below for details.
•The print preview is a generated image of the label, and may differ from the actual label when printed.
Printing a Label
Labels can be printed once text entry and formatting is complete.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape, making the tape no longer usable.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
• Be sure to check that there is enough tape remaining when printing several labels continuously. If tape is running low, set fewer copies, print labels one at a time, or replace the tape cassette.
• Striped tape indicates the end of the tape cassette. If this appears during printing, press the Power key to turn the
Press Print key to start printing.
Printing a range of pagesWhen there are multiple pages, you can specify the range of pages to print.
1Press the Print key. The screen you can specify the range is displayed.
2Select "All", "Current" or "Range" by using
or
key. If you select "All" or "Current", go to step 4.
3Specify the first page and the last page.
Blank pages are not printed.
4Press the OK or Enter key to print.
41Label Preview