TROUBLESHOOTING

Message

Cause/Remedy

Text

The length of the label to be printed using the text entered is longer than

Too Long!

the length setting. Edit the text to fit within the set length or change the

 

length setting.

Memory Full!

There is not enough internal memory available when you try to save a label

 

file. Delete any unnecessary files to make more memory available for the

 

new label file.

Check # of

The number of digits entered in the bar code data does not match the

Digits

number of digits set in the bar code parameters. Enter the correct number

Entered!

of digits.

Input A,B,C or D

The bar code data entered does not have the required start/stop code (A,

At Start&End!

B, C, or D required at the beginning and end of the bar code data for the

 

CODABAR protocol). Enter the bar code data correctly.

Maximum Of

There are already five bar codes entered in the text data when you try to

5 Bar Codes

enter a new bar code. You can only use up to five bar codes in each label.

Per Label!

You can enter up to two bar codes when (AAAA) is selected in flag layout.

Text

The text size is too large. Select a different size option.

Too High!

 

Installed tape

Installed tape is incompatible with this labeling system. Use compatible

is not compatible

tape.

with this machine!

 

System Error XX

Please contact Brother customer service.

Select Other

The tape length set using the tape length setting is shorter than the total

Cut Option!

length of the left and right margins applied for the "Large Margin" cutting

 

option. You have to select a different cutting option.

Line Limit!

Exceeds max. You can enter up to 100 lines in the whole page and blocks.

Max 100 Lines

 

per Label

 

Block Function

In this setting, you cannot add or delete blocks.

is Not Allowed!

 

Line Limit!

PUNCH-DOWN BLOCK layout allows to print up to 2 lines / block.

Max 2 Lines

 

This Function

PUNCH-DOWN BLOCK layout must use 0.35" (9 mm) or wider tape

Requires 0.35"

cassettes.

or Wider Tape!

 

This Function

 

Requires 9mm

 

or Wider Tape!

 

Sequence Type

Texts cannot be edited when you set Sequence Type in PUNCH-DOWN

Must be None

BLOCK to Horizontal or Backbone.

When Editing!

 

Cassette Type

For example, Heat Shrink Tube cartridge is detected but Heat Shrink Tube

Does Not Match.

mode is not selected, or Heat Shrink Tube mode is selected but the Heat

Continue?

Shrink Tube cartridge is not inserted into the P-touch labeling system.

49 Error Messages