
EDITING A LABEL
Entering Accented Characters
The
1Enter the character you wish to change to an accented character.
Caps mode can be used with the Accent function.
2Press the Accent key.
The character you entered will change to an accented character.
3Press the Accent key repeatedly until the desired accented character is selected, or select it by using the
or
key.
The order of accented characters displayed will differ depending on the selected LCD language.
4Press the OK or Enter key.
The selected accented character is inserted into the line of text.
• Press the Escape key to return to the previous step.
• Refer to the Accented Character List table for a complete list of all accented characters available.
Setting Character Attributes
Setting Character Attributes by LabelUsing the Style key, you can select a font and apply size, width, style, line, and alignment attributes. Selectable “Character Attribute” options are listed in the Appendix. (See page 52)
1Press the Style key.
The current settings are displayed.
2Select an attribute using the
or
key, and then set a value for that attribute using the
or
key.
3Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK or Enter key.
• Press the Escape key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
•Refer to the Setting Options table for a list of all available settings.
•Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic).
•Depends on the labeling application type, you cannot change the value in Style setting. In that case,
is displayed on the preview in the right side of the screen.
| Entering Accented Characters |
37 | |
|
|