26

Specifying the character width

Formatting the width of all text

1Press t.
2Press l or r until GLB WIDE is displayed.
3Press u or d until the desired character width setting is displayed.
4Press n. The selected setting is applied to the entire text.

Formatting the width of a line

1Move the cursor to the line of text whose character width you wish to change.
2Press g, then E.
3Press l or r until WIDTH is displayed.
4Press u or d until the desired character width setting is displayed.
5Press n. The selected setting is only applied to the text line that the cursor is
positioned in.
The following width sizes are available for each text size as shown.
Width
Size NORMAL NARROW MINIMUM WIDE
12 mm
(48 points)
9 mm
(36 points)
6 mm
(24 points)
4 mm
(18 points)
3 mm
(12 points)
2 mm
(9 points)
1 mm
(6 points)