Brother PT Series manual No Tape

Error Message	Cause	Solution
	• This message appears if less	• Enter a minimum of four
MIN 4 DIGITS!	than the minimum four	digits before pressing
	digits are entered as the bar
		n.
	code data.
	• This message appears if no	• Store a text file before trying
NO FILES!	files are stored in the	to recall or delete one.
	memory when you try to
	recall or delete one.
	• This message appears if no	• Install a tape cassette and try
NO TAPE!	tape cassette is installed	again.
	when you try to feed the
	tape, print or use the
	Preview function.
TEXT TOO HIGH!	• This message appears if the	• Reduce the size of the
	size of the text is larger than	characters, install a tape with
XX BLOCK	the width of the installed	a greater width, or select the
	tape.	AUTO text size setting.
	• This message appears if the	• Press A, and then select a
TEXT TOO LONG!	length of the text is longer	longer label length.
	than the label length that has	• Reduce the size or width of
	been set with the Length	the characters, or select the
	function.	AUTO text size setting.
TEXT TOO LONG!	• This message appears if you	• Select a longer block length.
	try to print a label that is
XX BLOCK	longer than the specified
	block length.
	• This message appears if the	• Type in a value that is within
	value entered while setting	the allowable range.
	the Margin, Length, and
VALUE OUT OF	Block Length function is not
	within the allowable range.
RANGE!
	• This message appears if the
	values for the blocks to be
	printed is not within the
	allowable range.

44