Brother ULT 2003D manual Viewing the LCD Display, Machine is not sewing

Viewing the LCD Display

When switching on machine, the screen will display the name of the machine. Touch the screen to display the utility stitch. The often used “Straight stitch (left)” (1-01) is automatically selected.

	1 Shows the amount of thread remaining in the
	bobbin during sewing. If the display is yel-
1	low, the bobbin is running out of thread.
2	Note
3
	This bobbin symbol does not show the
4	amount of bobbin thread remaining when the
	machine is not sewing.
5	2 Shows single or twin needle mode setting, and
	the needle stop position.
	6
	Single needle/	Single needle/
	down position	up position

Twin needle/	Twin needle/
down position	up position

3 Presser foot code. Attach the presser foot in- dicated in this display before sewing.

4 Shows the name and code number of the se- lected stitch.

5 Shows a preview of the selected stitch.

6 To select, press the key of the stitch pattern you want to sew.

CONTENTS

1—

2—

3—

4—

5—

6—

7—

8—

9—

?!

Index

Setting Up 1-13