Brother ULT 2003D manual Sewing Heavyweight Fabrics, Sewing Lightweight Fabrics

Sewing Heavyweight Fabrics

CONTENTS

The sewing machine can sew fabrics up to 6 mm(1/4 inch) 1 — thick. If the thickness of a seam causes sewing to occur on an angle, help guide the fabric by hand and sew on the downward slope.

CAUTION

Do not forcefully push fabrics more than 6 mm (1/4 inch) thick through the sewing machine. This may cause the needle to break and cause injury.

2 —

3 —

6

6

Sewing Lightweight Fabrics

1

If the presser foot lever is in the up position, and you are sewing heavyweight or multiple layers of fabric which does not fit easily under the presser foot, raise the presser foot

lever as high as possible by hand to bring the presser foot 4 — to its highest position. The fabric will now fit under the presser foot.

5 —

If the fabric does not feed when starting to sew or when sewing thick seams, press the black button on the left side

of presser foot “J”.6 — 1. Raise the presser foot lever.

2. While keeping the black button on the left side of presser foot “J” pressed in, lower the presser foot lever.

7 —

3. The presser foot remains level, enabling the fabric to
be fed. After continuing sewing, the presser foot will	8 —
return to its normal position.
	9 —
	?!

Place thin paper under thin fabrics to make sewing easier. Gently tear off the paper or the stabilizer for embroidery after sewing.

1Thin paper

Index

2-4 Getting Ready to Sew