Brother ULT 2003D manual Entering Stitch Data, Creating Stitch Data

ENTERING STITCH DATA

Creating Stitch Data

Note

Make sure that the embroidery unit is not attached.

1.Press to display the screen at left.

2.Press .

1 MY CUSTOM STITCHTM key

1

1This area displays the stitch that is being created.

2The number beside indicates the y coordinate

of the tip of , and the number beside indi-

cates the x coordinate of the tip of .

3This number indicates the present set point in

				2		relation to the entire number of set points in the
					4	design.
						4 Press this key to display a screen that allows you
						to change a set point. (Refer to page 7-6for more
		7				details).
						5 Press this key to select whether one stitch or three
1			9
5	6					stitches are sewn between two points.

6Press this key to erase the last point that has been set.

	7 Press this key to add the point indicated
	by	.
	8 Press this key to finish creating the stitch and dis-
	play the screen that allows you to see the en-
	tered stitch. (Refer to page 7-4.)
8	9 Press these keys to move.

CONTENTS

1—

2—

3—

4—

5—

7

6—

7—

8—

9—

?!

Index

My Custom Stitch 7-3