Brother ULT 2003D manual Using the Automatic Thread Cutter

Using the Automatic Thread Cutter

After selecting a stitch pattern, turn on the automatic thread cutting function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of sewing, and trim the threads at the end of sewing. This function is useful when sewing buttonholes and bar tacks.

1.Select a stitch pattern.

2.Press to set the automatic thread cutting func-

tion. The key will display as .

Note

This function is set automatically when sewing embroi- dery.

CONTENTS

1—

2—

3—

5

1

6

5

6

1

3.Set the fabric in the start position and start sewing. The machine will automatically sew reverse stitches (or reinforcement stitches) and then continue sewing.

1 Reverse stitches (or reinforcement stitches)

Note

If you use the “Start/Stop” button to pause sewing, press the same button again to continue. The beginning reverse/ reinforcement stitches will not be sewn again.

4.Press the “Reverse/Reinforcement Stitching” button. The machine will sew reverse stitches (or reinforcement stitches), then trim the thread.

To turn off the automatic thread cutting function, press

the again, so it appears as .

1 Sews reverse stitches (or reinforcement stitches) and automatically trims the thread.

4—

5—

6—

7—

8—

9—

?!

Index

Getting Ready to Sew 2-15