Brother PT-2700 manual ZTape Cuttingz, Description Example, When printing labels one at a time

zTape Cuttingz

Setting	Description		Example
Large	Automatically cuts the tape after each label is		ABC		ABC
	printed. The labels have a 0.94" (24 mm)
Margin			0.94" 0.94"
	margin on the left and right ends.
			(24 mm) (24 mm)
	• When printing labels one at a time:		0.92" (23 mm)
	Automatically cuts a piece of blank tape
	before printing the label, and then cuts the		ABC		ABC
Small	tape after the label is printed.		0.16"	0.16"
	• When printing several labels continuously:		(4 mm)	(4 mm)
Margin	Automatically cuts a piece of blank tape
	before printing the first label, and then cuts
	the tape after each label is printed.
	• The labels have a 0.16" (4 mm) margin on
	the left and right ends.
	• When printing labels one at a time:		0.92" (23 mm)
	Automatically cuts a piece of blank tape
	before printing the label, and then does not			ABC ABC
	cut the tape after the label is printed.		0.16"		0.16"
	• When printing several labels continuously:		(4 mm)		(4 mm)
Chain	Automatically cuts a piece of blank tape
	before printing the first label, and then cuts
	the tape after each label is printed.
	• The labels have a 0.16" (4 mm) margin on
	the left and right ends.
	• The tape is not fed and cut after the last
	label is printed.
	• Use this setting to print a strip of labels with
No Cut	no cuts in between.			ABC ABC
	• Pressing the	while holding down
			1.06"		0.31"
	key will feed and cut the last label
	printed.		(27 mm)		(8 mm)

• When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, refer to “Manual Cutting” on page 64 to apply the appropriate setting.

•The tape is not cut after the last label is printed when “Chain” or “No Cut” is set. Hold down

the key and press the key to feed and cut tape automatically, or cut the tape manually if you are using Fabric Iron-on Tapes or Extra Strength Adhesive Tapes.

z LABEL PRINTING

1

2

3

4

5

6

7

8

9

Tape Cutting Options

63