66
Storing a Label into Memory
USING THE FILE MEMORY
You can store up to 99 of your most frequently used labels in the file memory. Each
label is stored as a file, allowing you to quickly and easily recall your label when needed
again.
After entering the text and formatting the label, press
the key to display the File screen.
Select "Save" using the or keys.
Press the or key.
A file number is displayed.
A label text is also displayed if a label is already stored
in that file number.
Select a file number using the or key, and then
press the or key to save the label under the
selected file number.
The file is saved and the screen returns to the text
entry screen.
• When the file memory is full, each time you save a file you will need to overwrite one of your
stored files.
• You will lose your stored files if the AC adapter is disconnected and the batteries are removed
for more than one minute.

Storing a Label into Memory

1
2
3
When there is already a stored file in the selected
number, the data will be overwritten by the file you try
to save.
4
• Press the key to return to the previous step.
• Up to 280 characters can be saved in one file, depending on the number of lines. However,
there is a maximum of 2800 characters for the total number of characters saved in up to 99
files. Text and layout formatting data is also saved in the file.
• To store a label created by using the Auto-Format Layouts, refer to “Using Auto-Format
Layouts�� on page38.