Printing a Single Copy

1Make sure that the appropriate tape cassette is inserted and ready for printing.

2Press the key.

The message shown on the right is displayed while the label is being printed.

To stop printing, press the key to turn off the P-touch labeler.

There are several other messages that may appear when you press the key. Refer to “Error Messages” on page 75 for further information about error messages.

z LABEL PRINTING

Printing Multiple Copies

Using this function you can print up to 99 copies of the same label.

1Make sure that the appropriate tape cassette is inserted and ready for printing.

2Hold down the key and press the key to display the print options screen, and then select “Copies” using the or keys.

3Press the or key to display the Copies screen, and then select the number of copies to be printed using the or keys, or type the number using the number keys.

Hold down the or keys to change the number of copies faster.

4Press the or key.

The message shown on the right is displayed while the labels are being printed.

• Press the key to return to the previous step.

• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to “Tape Cutting Options” on page 62 to change this setting.

The figures shown on the screen during printing indicate the “count / number of copies set”.

Pressing the key when setting the number of copies resets the value to 1, the default.

1

2

3

4

5

6

7

8

9

Printing a Label

59

Page 65
Image 65
Brother PT-2700 manual Printing a Single Copy, Printing Multiple Copies, Label Printing