Brother Label Printing and Length Adjustment in the P-Touch 2700 Manual

LABEL PRINTING

Manual Cutting

When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set "On" for Manual Cutting before printing. After printing, remove the tape cassette from the machine and use scissors to cut the tape.

1

Press the key to display the setup menu, select "Manual Cutting" using the or keys, and then press the or key.

2

Select the value by using the or keys.

3

Press the or key to apply the setting.

•	Press the	key to return to the previous step.
•	Press the	key to set the value to default setting (“Off”).

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

1

Press the key. The current settings are displayed.

2

Select "Adjust Length" by using the or keys, and then set the value by using the or keys.

3

Press the or key to apply the setting.

•Press the key to return to the previous step.

•Press the key to set the value to default setting.

•Approximately 1% of the total label length will be adjusted by 1 level.

64

Manual Cutting