Feeding Tape
The Feed & Cut function feeds 0.92" (23mm) of blank tape then cuts the tape.
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
1 | Hold down the | key and press the | key. |
| “Feed & Cut?” appears on the display. |
| |
|
| ||
2Press the 
or 
key to feed tape.
The message “Feeding Tape... Please Wait” appears while the tape is fed, and then the tape is cut.
Press 
while “Feed & Cut?” is displayed to cancel tape feeding.
z GETTING STARTED
LCD Display
LCD Contrast
You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0,
1Press the 
key to display the Mode menu, select “LCD Contrast” using the 
or 
key, and then press the 
or 
key.
2Select a contrast level using the 
or 
key.
The screen contrast changes each time you press the
or 
key, allowing you to set the most suitable contrast.
3Press the 
or 
key.
• | Press the | key to return to the previous step. |
• Pressing the | key on the contrast setting screen sets the contrast to the default value | |
| “0”. |
|
1
2
3
4
5
6
7
8
9
Feeding Tape
21 |
