Brother ULT 2003D manual Supplemental Spool Pin Flat Bed Attachment/Free Arm

■Supplemental Spool Pin

■Flat Bed Attachment/Free Arm

CONTENTS

1 —

Use this spool pin to wind the bobbin thread during sew- ing, or when sewing with the twin needle (see pages 1-29,2-5).

2 —

3 —

Use the free arm sewing option to attach cuffs, hem pant

legs, and sew other tubular pieces. Pull the flat bed at- 4 — tachment to the left to remove it and create the conven-

ient free arm sewing mode.

5 —

■Feed Dog Position Switch

1

■Presser Foot Dial

1

3

2

Use this switch when attaching buttons (see page 3-61)or for other similar projects. Remove the flat bed attachment and raise the presser foot lever to operate the feed dog

position switch. Set the lever in the position for nor- mal sewing

1Feed dog position switch

..... The feed dogs are up and will help guide the fabric.

..... The feed dogs are down and will not help guide the fabric.

Turn the presser foot dial in order to adjust the pressure applied by the presser foot. The higher the number, the stronger the pressure will be. The presser foot dial has set- tings from 1 (weakest) to 4 (strongest). Use setting “3” for normal sewing. Lower the presser foot lever before turn- ing the presser foot dial. If you adjust the setting, be sure to return it to “3” after sewing.

1Weak

2 Strong

6—

7—

8—

9—

?!

Index

1-6 Setting Up