2. Attach presser foot “J”. Hold the thread tails and fabric with your left hand, and turn the balance wheel with your right hand to insert the needle into the fabric. This is the sewing start position.
6
CONTENTS
1 — |
2 — |
3 — |
| 5 |
1 | 6 |
|
6 |
3.Lower the presser foot, and hold the “Reverse/Reinforce- ment Stitch” button to sew
1 3 - 4 reverse stitches
CAUTION
Be sure the needle does not strike a basting pin, or any other objects, during sewing. The thread could tangle or the needle could break, causing injury.
4.When sewing is completed, hold the “Reverse/Rein- forcement Stitch” button to sew
5.After sewing, press the “Thread Cutter” button to trim the threads.
*When the automatic thread cutting and automatic re- inforcement stitch keys on the screen are selected, re- verse stitches (or reinforcement stitches) will be sewn automatically at the start of sewing when pressing the “Start/Stop” button. Press the “Reverse/Reinforcement Stitch” button to sew reverse stitches (or reinforcement stitches) and trim the thread automatically at the finish of sewing.
4 — |
5 — |
6 — |
7 — |
8 — |
9 — |
?!
Sewing Utility Stitches |
