Brother WL660 manual Cleaning the Primary Corona Wire

English

USER’S GUIDE

9.Clean the primary corona wire inside the drum unit by gently sliding the tab right and left several times.

Home Position (▲) Bottom view of drum unit

Fig. 5-19 Cleaning the Primary Corona Wire

10.When cleaning is completed, position the tab at the left end of the drum unit (▲ mark position.)

☛Caution

Be sure to position the tab at the home position or to the left end of the drum after cleaning.

11.Re-install the drum unit into the printer.

See the section “REPLACING THE DRUM UNIT” in Chapter 5.

12.Close the drum cover and top cover.

☛Caution

Be sure to close the drum cover securely by pressing down firmly on both sides next to the blue tabs.

13.Install the multi-purpose sheet feeder.

See the section “MULTI-PURPOSE SHEET FEEDER” in Chapter 2.

14.Plug in the power cord.

5–14