41652_model44760_web.pmd
18
PROGRAMMING | 18 |
Setting Time and Day
■The LCD will show this information when batteries are first installed, or after the Reset button is pressed.The temperature will update after a few seconds.
■During time and day setting mode, the temperature and program displays will go blank.
■Example: Set the Thermostat to the current time of 2:16 PM on Saturday. Refer to the Steps below.
Monday 4
Temp
AM
SystemFan
Step 1 | |
| or |
Step 2 | |
| or |
■Press to enter time and day setting mode. The current hour and the AM / PM indicator will be flashing.
■Press to change the Hour up or down to the current hour.
Note the AM / PM indicator, as the display will change at 12 AM and 12 PM.
■Press again to change from hour setting to minute setting. The current minute will be flashing.
■Press to change the Minute up or down to the current minute.
Monday
AM
Monday
PM
19
Step 3 | ■ Press again to change from minute setting to day setting. The current | Saturday | |
|
| day will be flashing. |
■ Press to change the Day up or down to the current day.
| or |
| PM |
|
|
|
|
| |
Step 4 | ■ Press again to change back to the normal display. | Saturday | 2 | |
|
| |||
| or |
|
| Temp |
|
| AM |
| |
|
|
| ||
|
| System | Fan | |
|
|
|
NOTE: You may press
12 Hr. / 24 Hr. Time Format
Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24 hour (military)
time, press option at any time while the Hour, Minute,
or Day is flashing to toggle between the 12 hour and 24 hour
formats. The AM / PM indicator will not be displayed in 24 hour mode. Both the current time and all programs will automatically change to the selected format. The time format may also be changed in the Option Menu.