41652_model44760_web.pmd
36
OPERATION | 36 |
Temporary Manual Override
To temporarily change the current set temperature without affecting your program:
■Press or and hold for about 1 second to enter Manual Override mode. Display will flash.
■Press or to change to your desired new temperature.
3
■ At the next program change, the Temporary Override is canceled, and
the next program temperature becomes the setpoint temperature.
Set Temp | Temp |
SystemFan
To end the Temporary Manual Override:
NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Temporary Manual Over- ride. Refer to the Auto Season Changeover feature on page 39 for more information.
NOTE: If Vacation Hold is set, then the number of days remaining will also be displayed. Refer to the Vacation (Programmable) Hold section on page 38 for more information.
37
Permanent Manual Override
To hold your manual override for an extended period of time:
cati | ■ Press to make the current room temperature the HOLD tempera- | |
va | on | |
| hold | ture. HOLD will alternate on the display with the day and any |
|
| other messages. |
■Follow the Temporary Override instructions above to change the Permanent Override temperature.
■You can confirm the held set temperature by pressing for less
or | than 1 second. |
37
Hold
Temp
AM
SystemFan
To end the Permanent Manual Override:
NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Permanent Manual Over- ride. Refer to the Auto Season Changeover feature on page 39 for more information.