41652_model44760_web.pmd

34

OPERATION

34

System Indicator Light

When the thermostat activates your system, LED lights are turned on just below the LCD display.

 

2

 

1 em

 

red

green or red

yellow

 

 

System Monitor This red LCD is controlled by your system and will turn on if there is a problem with your system. It can only work if you have a connection to the L terminal.

1em

Stage 1 Light This LED will turn on in GREEN when the first stage of heat or cool is activated. When in Emergency Heat mode, this LED will turn on in RED when the first stage of emergency heat is activated.

2

Stage 2 Light This LED will turn ON in YELLOW when the second stage of heat, emergency heat or cool is activated.

The Stage 1/Emergency and Stage 2 LED’s will flash On/Off when the corresponding stage is being held off tempo- rarily. For example, during a compressor delay.

35

Emergency Heat

35

When the Power Switch is in the “em” position, the thermostat is placed in the Emergency Heat mode. The compressor will not operate in this mode and only auxiliary heat will be used.

NOTE: Emergency Heat Mode is not an energy saving set- ting, so use only when necessary.

Reviewing the Current Temperature Setting

 

■ Current time and temperature.

 

■ Thermostat is set to AUTO and the heating system is selected.

 

■ Press for 1 second or less.

or

■ Set Temperature is shown beside current room temperature.

 

■ If held for over 1 second, Temporary Manual Override mode is entered.

 

Refer to the next section.

Saturday 4

Temp

PM

SystemFan

Saturday 4

Set Temp

Temp

SystemFan