Bryant 44760 Weekday/Weekend Programming

41652_model44760_web.pmd

24

PROGRAMMING 24

Weekday/Weekend Programming

Step 1	■	Slide Power Switch to ON.
on off em	■ Press to select HEAT or COOL to program the corresponding system.
		(AUTO may be selected, but does not affect the programming steps.)

NOTE: If the power switch is in the OFF position, the last system selected will be programmed.

Thursday 2

Temp

AM

SystemFan

Step 2	program
Step 3
	or
Step 4	program
	or

■Press to enter program mode. Weekdays are displayed and program 1 is flashing.

■The Program hour and AM or PM indicator are flashing. Press to change the hour.

■Press again to change to the minute position. The current minute will be flashing.

■Press to change the minute.

Weekdays	1 2 3 4
	Temp
AM
System	Fan

Weekdays	1 2 3 4
	Temp
AM
System	Fan

25

Step 5	program	■ Press again to change to the program temperature. The current
		temperature will be flashing.

■Press to change the temperature.

or

Weekdays	1 2 3 4
	Temp
AM
System	Fan

Step 6	program
Step 7	prog-day
	ret-clear

■Press again to move to the next program number.

■Repeat Steps 3 through 5 to change the remaining Weekday programs.

■Press to change to Weekend programs.

■Repeat steps 3 through 5 to complete the weekend programs.

■Press at any time to exit the Program Mode.

■After 15 seconds, the thermostat will return to normal mode automatically.

Weekends	1 2 3 4
	Temp
AM
System	Fan

Step 8 system ■ Change to the other system, and repeat steps 2 through 7.