Bryant 524J manual Preferred Suspension Technique, Overhead Suspension Accessory - Unit Size

Typical positioning and alternate return air locations are shown in Fig. 6. Alternate return air locations can be used by moving the unit panel from the alternate return air location to the standard return air location. Refer to overhead suspension accessory drawing (Fig. 7) for

preferred suspension technique. The unit needs support underneath to prevent sagging.

IMPORTANT: Do NOT attempt to install unit with return air entering top panel of unit. Condensate will not drain from unit.

OVERHEAD SUSPENSION ACCESSORY — UNIT SIZE 25

524J

OVERHEAD SUSPENSION ACCESSORY — UNIT SIZES 28, 30

NOTE: Dimensions in [ ] are millimeters

Fig. 7 - Preferred Suspension Technique

C10728

10