Bryant 548J manual Ari Cooling Rating Tables

548J

Table 2 – ARI COOLING RATING TABLES

			COOLING MODE
	NOMINAL	NET COOLING	TOTAL
548J*	CAPACITY	CAPACITY	POWER	SEER	EER	IPLV
	(TONS)	(BTUH)	(kW)
04A	3	37,000	3.3	13.40**	11.00	N/A
05A	4	47,000	4.1	13.10**	11.20	N/A
06A	5	61,500	5.5	13.20**	11.15	N/A
07A	6	70,000	6.3	N/A	11.10	N/A
08D	7.5	88,000	7.8	N/A	11.20	12.40
09D	8.5	99,000	8.8	N/A	11.20	12.40

NOTE:

All AHRI ratings are based on 230, 460 and 575 volt.

**Electric Drive (direct drive) X13 5 speed/torque motor. SEER rating is 13.0 for belt drive.

NA Not applicable

		HEATING MODE
548J*	HSPF	HEATING, LOW		HEATING, HIGH
		CAPACITY	COP	CAPACITY	COP
		(BTUH)		(BTUH)
04A	7.70	18,200	N/A	35,600	N/A
05A	7.70	23,600	N/A	45,500	N/A
06A	7.70	31,200	N/A	58,000	N/A
07A	N/A	34,800	2.25	67,000	3.30
08D	N/A	48,000	2.25	86,000	3.30
09D	N/A	54,500	2.25	96,000	3.30

LEGEND
ARI	--- Air---Conditioning, Heating and Refrigeration
		Institute
ASHRAE	--- American Society of Heating, Refrigerating
		and Air Conditioning, Inc.
COP	---	Coefficient of Performance
EER	---	Energy Efficiency Ratio
HSPF	---	Heating Seasonal Performance Factor
IPLV	--- Integrated Part Load Value
SEER	--- Seasonal Energy Efficiency Ratio

NOTES:

1.Rated and certified under ARI Standard 210/240---06 or 340/360---07, as appropriate.

2.Ratings are based on:

Cooling Standard: 80_F (27_C) db, 67_F (19_C) wb indoor air temp and 95_F db outdoor air temp.

IPLV Standard: 80_F (27_C) db, 67_F (19_C) wb indoor air temp and 80_F (27_C) db outdoor air temp.

3.All 548J units comply with ASHRAE 90.1 2001, 2004 Energy Standard for minimum SEER and EER requirements.

4.Where appropriate, 548J units comply with US Energy Policy Act (2005). Refer to state and local codes or visit the following website: http://bcap---energy. org to determine if compliance with this standard pertains to your state, territory, or municipality.

This product has been designed and manufactured to meet Energy Star® criteria for energy efficiency. However, proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow all manufacturer’s refrigerant charging and air flow

instructions. Failure to confirm proper charge and air flow may reduce energy efficiency and shorten equipment life.

8