Paragon 200 - Edition 4.3 – 26th Sept ’00
To set your PIN
To play back messages
Sel
Press buttons in the order shown
Press and release until the display
shows SECURITY CODE.
Ring your answering machine as |
normal. |
Press and release during the outgoing |
message. The prompt says “Please enter |
OK
The prompt says “Please enter your
4 digit security code” and displays the current PIN.
| your 4 digit security code”. |
PIN | Use the keypad to enter your security |
| PIN. Wait to hear the confirmation |
ANSWER MACHINE
KEYPAD Enter the
OK | To confirm the PIN displayed. |
|
Please note
When calling your Paragon 200 from another
phone, it allows two attempts to enter the correct PIN. If this is not done, you hear the message “Thank you for calling” and the machine hangs up.
To switch on your answering machine
If you have forgotten to switch on your answering machine
Ring your answering machine from another phone
After 20 rings, your Paragon 200 will automatically answer the call.
HANG UP Your answering machine is now switched on.
| beep after each digit. | |
| After the last digit, the prompt says | |
| “You have X messages” and begins to | |
| play them. | |
| You can now control your answering | |
| machine by pressing the appropriate | |
| button on the keypad: | |
A |
| |
BC | Play messages. | |
2 | ||
G |
| |
HI | Skip back to previous message. | |
4 | ||
J | Delete the message being played | |
KL | ||
5 | ||
(or delete all messages at the end of | ||
| ||
| play back). | |
M |
| |
NO | Skip forward to the next message. | |
6 |
16
