Paragon 200 - Edition 4.3 – 26th Sept ’00
Introduction
Your Paragon 200 has been designed for ease of use and made
to the high standards set by BT.
You can expect your Paragon 200 to give you many years of
Please read the instructions carefully before use and keep this User Guide for future reference.
Unpacking your Paragon 200
If anything is missing, please contact your place of purchase immediately.
INTRODUCTION
For your records
Date of purchase:
Place of purchase:
Serial number (on the underside of the telephone base):
Purchase price:
For warranty purposes, proof of purchase is required, so please keep your receipt.
●Paragon 200 telephone answering machine.
●Handset and cord.
●Plug mounted, 13 amp mains adaptor.
●Line cord.
I2:05
1 2 3
4 5 6
7 8 9
0
●Wall mounting plugs and screws.
Enter your PIN here
● Plinth for desk mounting
● Remote access card. Spare memory label.
See page 15/16 for more information about your PIN.
Operating your Paragon 200 from another telephone
To switch the answering machine ON:
•Dial your phone number.
•Let the phone ring for 20 rings.
Your outgoing message begins to play. Your Paragon 200 is now on and you may hang up.
To access the answering machine menu: | ||
• | Press and release the | button during |
| the outgoing message. |
|
•Enter your security code.
Remote access menu | |
Press to: | |
2 | Play messages. |
4 | Skip back to previous |
| message. |
5 | Delete the message being |
| played (or delete all messages |
| at the end of play back). |
6 | Skip forward to the next |
| message. |
| Skip outgoing message |
| (OGM). |
4
