Manuals / BT / Communications / Cordless Telephone

BT 200 manual To adjust the ringer volume, Prompt says Please select the ringer

Models: 200

1 28

Download 28 pages 55.93 Kb

Page 21

Image 21

Paragon 200 - Edition 4.3 – 26th Sept ’00

To adjust the ringer volume

Press buttons in the order shown

You can select between three different volume levels, off, medium and loud.

	Sel	Press and release until the display
	Sel	shows RINGER.
		shows RINGER.

Vol

The prompt says “Please select the ringer.”

To adjust the ringer volume. You will be able to hear the change in the volume setting. The level is shown at the bottom of the display.

OPTIONAL

OK	To confirm the level displayed.

Note

If you switch the ringer volume off, RINGER OFF remains in the display.

To adjust the display contrast

While your phone is idle:

Press to decrease or increase the contrast.

Page 21

Image 21

BT 200 manual To adjust the ringer volume, Prompt says Please select the ringer, To adjust the display contrast

Contents

Paragon UserGuideParagon 200 Edition 4.3 26th Sept ’00 Paragon 200 Edition 4.3 26th Sept ’00 Allows you to change the display contrast At a glanceDefault TB This guide Using the telephoneUnpacking your Paragon IntroductionFor your records Enter your PIN hereInsert back-up battery Setting upPlan the location of your Paragon It should not be used in bathrooms or near waterConnect handset cord to base Check Dial Mode setting default TBConnect the telephone line cord Plug the mains adaptor cord into the back of the telephoneFit plinth for desk mounting and track cables Plug the mains adaptor into the wall socket and switch onWall-mounting your Paragon Says Please enter the time using the 24 hour clockTo set the day and time Press buttons in the order shownUsing the telephone Using the Inductive CouplerMaking and ending calls To adjust the earpiece volume during a call Using the one-touch buttonsTo store a one-touch number To make a one-touch callUsing the quickdial memory To make a quickdial call To store a quickdial numberTo delete/change a quickdial number To switch the answering machine on, off and to Answer Only Using the answering machineTo record your own outgoing message To record a memoTo delete your personal OGM To playback your messages Message and Ring IndicatorTo privately playback your messages through the handset To delete all messagesTo adjust the playback volume Using Remote AccessTo switch on Caller Return To use Call Screening To use Caller Return AutoTo set your PIN To play back messages To switch on your answering machineUse the keypad to enter your security PIN. Wait to hear the confirmationOptional Settings To adjust the ring toneRinger To adjust the ringer volume To adjust the display contrastPrompt says Please select the ringer Safety GuaranteeGeneral information Help and advice Technical information0845 330 If the power fails Wall-mounting template Index Rtte Offices worldwide