Setting up, Plan the location of your Paragon | BT 200 specs

Paragon 200 - Edition 4.3 – 26th Sept ’00

Setting up

Follow these steps to set up your Paragon 200 ready for use.

Plan the location of your

Paragon 200

Situate your Paragon 200 close enough to both the phone and mains power sockets so that the cables will reach.

Your Paragon 200 should be kept free of dust, moisture, high temperature, vibration and should not be exposed to direct sunlight. Do not stand it on carpets or other surfaces which generate fibres or place it in locations which prevent the free flow of air over its surfaces.

Warning

The apparatus is designed to be operated in a normal office or domestic environment where the relative humidity does not exceed 75%.

It should not be used in bathrooms or near water.

1Insert back-up battery

Although optional we recommend fitting an alkaline battery which will provide up to 25 hours back-up and ensure your messages are saved in the event of a mains power failure.

Ensure the Paragon 200 is disconnected from the telephone line.

To fit the battery.

1Lift the cover.

2Insert one LR61 9V battery (not supplied).

1

2

SETTING UP

Battery low warning

The display indicates when the battery power is low. If no battery is inserted, it remains on the display.

5

Image 8

BT 200 manual Setting up, Plan the location of your Paragon, It should not be used in bathrooms or near water

Contents

UserGuide Paragon Paragon 200 Edition 4.3 26th Sept ’00 Paragon 200 Edition 4.3 26th Sept ’00 At a glance Allows you to change the display contrast Default TB Using the telephone This guide Introduction Unpacking your ParagonFor your records Enter your PIN here Setting up Insert back-up batteryPlan the location of your Paragon It should not be used in bathrooms or near water Check Dial Mode setting default TB Connect handset cord to baseConnect the telephone line cord Plug the mains adaptor cord into the back of the telephone Plug the mains adaptor into the wall socket and switch on Fit plinth for desk mounting and track cables Says Please enter the time using the 24 hour clock Wall-mounting your ParagonTo set the day and time Press buttons in the order shown Making and ending calls Using the telephoneUsing the Inductive Coupler Using the one-touch buttons To adjust the earpiece volume during a callTo store a one-touch number To make a one-touch call To delete/change a quickdial number Using the quickdial memoryTo make a quickdial call To store a quickdial number Using the answering machine To switch the answering machine on, off and to Answer Only To delete your personal OGM To record your own outgoing messageTo record a memo Message and Ring Indicator To playback your messagesTo privately playback your messages through the handset To delete all messages Using Remote Access To adjust the playback volumeTo switch on Caller Return To use Call Screening To use Caller Return Auto To switch on your answering machine To set your PIN To play back messagesUse the keypad to enter your security PIN. Wait to hear the confirmation Ringer Optional SettingsTo adjust the ring tone Prompt says Please select the ringer To adjust the ringer volumeTo adjust the display contrast General information SafetyGuarantee 0845 330 Help and adviceTechnical information If the power fails Wall-mounting template Index Rtte Offices worldwide