BT 600 manual To register a handset to another base, At the base, At the handset

Synergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ 3718

Using additional handsets and bases

Up to 5 handsets can be registered and operated from any one Synergy 600 base. This allows you to make internal calls between two handsets while a third is making an external call.

To register a handset to another base

At the base:

HANDSETS

1	2	3
4	5	6
7	8	9	DECT
	0
1	2	3
4	5	6
7	8	9
	0

Synergy 600
1	2	3
4	5	6
7	8	9
	0
Page
Power
In Use
1	2	3
4	5	6
7	8	9
	0

Page Press and hold the base PAGE
		button for at least 10 seconds,
		until you hear the validation
		tone (two beeps), then release
		the button.
		At the handset:
M	en	Press the  button to enter
	u

ADDITIONAL

1 2 3

4 5 6

7 8 9

0

Each handset can be registered on up to 4 bases.

Each additional handset you purchase must be registered with the base.

Your handset supplied is pre-registered as Handset 1 to its base (Base 1).

Note

Remember to charge the battery pack of new handsets for at least 16 hours before use.

If the display shows NOT SUB and the symbol is flashing, your handset is not yet registered with the base.

	the menu.
Calls	Use the DOWN button to
	scroll to REGISTER and press
Menu

the  button.

		The display will show
		BS 1 2 3 4. (The numbers
		that are flashing indicate
		other bases that the handset is
		already registered to).
KEYPAD		Enter the base number
		(BS 1-4) that you want to
		register the handset to.
KEYPAD		Enter your 4-digit PIN
M	u	(original factory setting OOOO)
	en

and press the  button.

The display will show

SEARCH 1, 2, 3, 4 and the

25