6
Synergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ 3718
INTRODUCTION
Introduction
Your Synergy 600 has been designed for ease of use and made
to the high standards set by BT.
Please read the instructions carefully before use and retain this user guide for
future reference.
Unpacking your Synergy 600 For your records
If anything is missing, please contact
your place of purchase immediately.
One Synergy 600 base station
One Synergy 600 handset
(Nicad battery pack fitted)
One power supply for base station
One telephone line cord
Date of purchase:
Place of purchase:
Serial number:
For guarantee purposes proof of
purchase is required so please keep
your receipt.
Enter your Base station PIN here:
See page 19 for more information.
General
Only use the power supply included with the product.
Using an unauthorised power supply will invalidate
your guarantee and may damage the telephone. The
item number for the mains power supply is 872260.
Do not open the handset or base station. This could
expose you to high voltages or other risks. Contact
the Synergy Helpline 0845 769 7146for all repairs.
Radio signals transmitted between the handset and
base may cause interference to hearing aids.
This product should not be used near emergency/
intensive care medical equipment and should not be
used by people with pacemakers.
Your product may interfere with other electrical
equipment, e.g. TV and radio sets, clock/alarms and
computers if placed too close. It is recommended that
you place your product at least one metre away from
such appliances to minimise any risk of intereference.
Never dispose of the battery pack in a fire. There is a
serious risk of explosion and / or the release of
highly toxic chemicals.
Cleaning
Simply clean the handset and base station with a
damp (not wet) cloth, or an anti-static wipe. Never
use household polish as this will damage the product.
Never use a dry cloth as this may cause a static shock.
Environmental
Do not expose to direct sunlight.
The product may heat up when the battery pack is
beingrecharged. This is normal. However, we
recommend that you do not place the product on
antique/veneeredwood to avoid damage.
Do not stand your product on carpets or other
surfaces which generate fibres, or place it in locations
preventing the free flow of air over its surfaces.
Do not submerge any part of your product in water and
do not use it in damp conditions, such as bathrooms.
Do not expose your product to fire, explosive or other
hazardous conditions.
There is a slight chance that your phone could be
damaged by an electrical storm. We recommend that
you unplug the power and telephone line cord for the
duration of the storm.
Safety information