Using your Converse 2-Line
To make a call on Line 1
Press buttons in order shown
Lift the handset and listen for the dial tone. The Line 1 red light comes on.
Dial the number you require.
To end the call, replace the handset.
To receive a call on Line 2
The phone rings and the red
Line 2 Ringer light flashes.
e | 2 | Press and hold down the Line 2 |
Lin | ||
|
|
button and lift the handset.
Release the Line 2 button and speak.
To end the call, replace the handset.
To make a call on Line 2
e | 2 | Press and hold down the Line 2 |
Lin |
|
button and lift the handset.
The Line 2 red light comes on.
Release the Line 2 button.
Dial the number you require and listen for the dialling tone.
To end the call, replace the handset.
To receive a call on Line 1
The phone rings and the red Line 1 Ringer light flashes.
Lift the handset and speak.
To end the call, replace the handset.
To put a call on hold
When a call is placed on hold, you cannot hear your caller and they cannot hear you.
|
|
|
| During a call: |
H | ld |
|
| Press and release the HOLD |
o |
|
|
| |
|
|
|
| button. |
|
|
|
| The IN USE light changes from red |
|
|
|
| to green and the call is on hold. |
Lin | e | 1 | To take the call off hold, press | |
| ||||
|
|
|
| |
|
|
|
| the Line 1 or 2 button (depending |
|
| e | 2 | on which line you are using. The |
Lin |
| |||
green light changes back to red and you can talk to your caller.)
8
