BT manual Register a different make of handset to your, BT Studio 3500 base, Selecting a base

8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 48

BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999

48	Additional handsets and bases
	Naming additional handsets		If the base is not found after a few seconds, the handset
	Once you have registered additional		returns to standby. Try registering again.
	handsets you may wish to give them a
	different name,		When a handset is registered to a base, it is automatically
	see page 40.
			assigned a number which is displayed on the handset and
			must be used for internal calls.
			If registration does not work:
		•	Try again selecting a different base number.
		•	Make sure there is no other electrical equipment very close by
			that may interfere with the registration signal.
	IMPORTANT		Register a different make of handset to your
	DECT GAP Profile only guarantees		BT Studio 3500 base
	that basic calling-functions will work
	correctly between different	1.	At the base: Press and hold	for 3 seconds until you hear
	makes/types of handset and base.		two beeps. You now have 90 seconds to register the handset.
	There’s a possibility that certain
	services such as Caller Display will not	2.	At the handset: Follow the registration instructions given in
	work correctly.
			your handset’s user guide.
			Selecting a base

Handsets can be registered with up to 4 bases.

When your handset is registered to more than one base, for example, one at work and one at home, you can select the base you want it connected to.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com