BT manual BT Studio 3500 multipack users only, Battery performance

8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 8

BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999

8 Getting started

Battery performance		BT Studio 3500 multipack users only:
To keep the batteries in the best		Place each BT Studio 3500 charger within reach of a mains
condition, leave the handset off the
base for a few hours at a time.		power wall socket.
Running the batteries right down at
least once a week will help them last
as long as possible.		Connect the charger(s) and charge the handset(s)
After charging your handset for the	i.	Plug the mains power adaptor into the power socket on the
first time, subsequent charging time for
the batteries is approximately 6 – 8		underside of the charger and plug the other end to the mains
hours.		power wall socket.
The charge capacity of rechargeable
	ii. Insert the 2 x AAA rechargeable batteries supplied, taking
batteries will reduce with time as they
wear out, thus reducing the		note of the polarity markings inside the battery
talk/standby time. Eventually they
		compartment, then slide the battery compartment shut.
will need replacing.
New batteries are available from the	iii. Place the handset on the charger. You should let the batteries
BT Studio Helpline on		charge continuously for at least 24 hours.
0870 605 8047 or email
bt.helpdesk@suncorptech.com.		The display will show the time and the handset number e.g.
		2, to show it is registered to the base.
		Your phone is now set up to make and receive calls. Please
		note that the answering machine is already switched on and is
		ready to answer incoming calls.
		To switch the answering machine off press	on the base.
		The machine announces “Answer Off”. See page 27 for more
		information about your answering machine.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com