8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 7

BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999

 

Getting started

7

2. Plug the power adaptor into the mains wall socket and switch

WARNING

 

the power on. When connected correctly, the green Power

Never use non-rechargeable

 

light on the base comes on.

batteries. Only use the approved

 

batteries. Using unapproved batteries

 

3. Insert the 2 x AAA rechargeable batteries supplied, taking

will invalidate your guarantee and

 

may damage the telephone.

 

note of the polarity markings inside the battery

Talk/Standby time

 

compartment, then slide the battery compartment shut.

 

Under ideal conditions, the handset

 

 

 

 

batteries should give about 10 hours

 

 

30 minutes talk time or 160 hours

 

 

standby on a single charge. (This does

 

 

not mean you can unplug the base or

 

 

leave it for this length of time without

 

 

charge).

 

 

Please note that new NiMH

 

 

rechargeable batteries do not reach

 

 

full capacity until they have been in

 

 

normal use for several days.

 

 

See ‘Battery performance’ on the

 

 

following page.

 

4.Place the handset on the base to charge. You should let the batteries charge continuously for at least 24 hours.

The batteries and case may become warm during charging, this is normal.

5.Once fully charged, plug the telephone line cord into the telephone wall socket.

Battery low warning

If the icon is flashing in the display and you hear a warning beep every minute during a call, you will need to recharge your handset before you can use it.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com

Page 7
Image 7
BT Studio 3500 manual Talk/Standby time, Battery low warning