Rendezvous is enabled by default so if you are using this service in your network, the server will be discovered.

If used, enter AppleTalk info, otherwise leave in default condition. After entering your settings, press the ‘Set’ button.

For further information please click on the ‘?’ icon next to the area in question.

Restore the TCP/IP settings. Open your ‘System Preferences’ and select ‘Network’. Set ‘Show’ to Buit-in Ethernet’. Restore the settings that were recorded previously. Use the ‘Using DHCP’ option from the pull down menu if the IP address is to be automatically assigned. Otherwise, enter the proper static IP address information. Press the ‘Apply Now’ button when configuration is complete.

21

Page 21
Image 21
Buffalo Technology LPV3-U2 user manual