◗Initialize AOSS mode on the AOSS Access Point. This is done by pressing the AOSS button on the Access Point. Typically the button will need to be pressed for
◗The wizard will search for any available AOSS Access Points. If you haven't already initiated the AOSS Access Point you may do so now; the wizard will wait until an AOSS Access Point is initiated.
■NOTE: AOSS mode will stay active for a period of two minutes. This is the time- slot required to initiate the wireless client adapter.
◗AOSS will communicate with the Access Point and automatically configure a secure connection, using the highest security level available for the two devices. If additional devices are added, the security level of all devices will adjust to accomidate the device with the lowest security standard. Thus, the entire network uses the highest level of security possible amongst all devices.
◗A confirmation page will appear momentarily. Client Manager will return to the 'Status' Screen where it will renew an IP address. Please wait for the renew process to complete (~30 seconds). Once complete the connection has been made and is stored for later use as well. You can press the 'X' on the client manager to close the screen. You may now access the network and/or Internet through a secure wireless connection.
12
