Bunn 41170.0001A manual Program Functions, H2O READY DONE + ENTER ASSET # ? NOYES

H2O READY: 190°

(-) DONE (+)

ENTER ASSET # ?

NOYES

SetPulseBrew A ?

NO DONE YES

AIR TIME A: 20

(-) DONE (+)

SetPulseBrew B ?

NO DONE YES

AIR TIME B: 20

(-) DONE (+)

BREWS TO EMPTY

(-) 25 (+)

Enabl EnergySavr

NO DONE YES

BREW COUNT ##

NOYES

CALIBRATE FLOW ?

NOYES

FLOW COUNTS / 10 oz

(-) 640 (+)

NUMBER OF EJECTS

SINGLEDOUBLE

BREWS ON THIS SEAL

RESET NEXT ##

PROGRAM FUNCTIONS

HOT H2o READY

Sets the minimum temperature allowable to start dispensing hot water.

ENTER ASSET #

This function allows the you to enter in an optional asset number. This can be useful for tracking the usage or service of an individual machine within a group.

SET PULSE BREW (LARGE) Individually adjust on/off times.

AIR TIME (LARGE) (1-25)

Time the pod is purged at the end of each brew cycle.

SET PULSE BREW (SMALL)

Individually adjust on/off times.

AIR TIME (SMALL) (1-25)

Time the pod is purged at the end of each brew cycle. Can be disabled if brewer is set up to dispose pods under counter.

BREWS TO EMPTY (OFF/15-25)

Set number of used pods in bin to turn on "EMPTY BIN" message.

ENABLE ENERGY SAVER

Choose to have the tank heaters turn off, or reduce the tank temp to (140° F) or (60° C) once the "SET IDLE TIME" has expired. .5-50.0 hrs.

BREW COUNTS

Retains the total number of brew cycles completed. There is one reset-able counter, and one life counter that is not reset-able.

CALIBRATE FLOW

Measure and enter the actual flow rate coming out of the sprayhead.

Number of pulses per ounce calculated during flow calibration.

FOR REFERENCE ONLY. DO NOT MANUALLY ADJUST!

You can set this to "DOUBLE" if you experience certain types of pods that do not reliably eject on single.

Use this counter to check/reset the seal replacement message.

CONTINUED

Page 7 41170.1 050312