Bunn service manual BUNN Espress, Replacement Parts, ES2A/ES2SA, Description

BUNN Espress™

REPLACEMENT PARTS

ES•2A™/ES•2SA™

Figure	Description	Part Number
1	Inlet water fitting	22849.0000
2	Brew water inlet tube	22614.0000
3	Heat exchanger bulkhead	22835.0000
4	Nut	24048.0100
5	Split lock washer	24028.0100
6	Heat exchanger tube (brew)	22613.0000
7	Stud	22834.0000
8	Tank-end bulkhead	22768.0000
9	4-way steam fitting	22828.0000
10	O-ring seal	22868.0000
11	Pressure pop-off valves	22575.0000
12	Water inlet tube	22857.0000
13	Steam outlet fitting	22850.0000
14	2-way steam fitting	22827.0000
15	Copper O-ring seal	22867.0000
16	Tank-end water & steam fittings	22817.0000
17	Tank (boiler)	22826.0000
18	Compression nut	22815.0000
19	Tank heater, 1300W, 220V (left)	22607.0000
20	Tank heater, 1300W, 220V (right)	22608.0000
21	Tank-end bulkhead gasket	22602.0000
22	”L“ bracket	22859.0000
23	Flat washer	24028.0001
24	Exchanger tube gasket	22612.0000
25	Tank heater mounting stud	22580.0000
26	Hex bolt (bulkhead mounting)	24008.0000
27	Tank heater mounting stud	22580.0000
28	Tank heater gasket	22579.0000
29	Tank heater terminal shorting bar	22818.0000
30	Tank heater terminal cover shield	22639.0000

19